Ampcontrol's iQguard carpark gas detectors are affordable, solid and robust devices designed for monitoring the level of toxic gases found in enclosed carpark and loading dock environments.
The iQguard carpark sensors are small light weight devices and easy to maintain and servcie. Operation is simple, and they are IP54 rated.
Used in conjunction with a controller, the iQguard carpark sensors run with variable speed drives on exhaust fans to reduce excess power usage.
{2jtoolbox_content tabs id:2 begin title: Features}
- CO [Carbon Monoxide] and NO2 [Notrogen Dioxide] sensing
- 2 wire loop
- Simple installation
- Simple maintenance
- Easy to use
- Simple operation, simply switch on the unit is ready for use
- Detector is fully temperature compensated for zero and span
- Unit requires around 30 minutes from switch-on to achieve stated accuracies
- Standard Detectable Gases / Standard Ranges
» 0 - 150ppm [CO]
{2jtoolbox_content tabs id:2 title: Specifications}
Performance |
Specification |
Detection method |
Electrochemical |
Sampling method |
Continuous diffusion |
Gas types |
Carbon Monoxide [CO]: 0 - 150ppm
Nitrogen Dioxide [NO2]: 0 - 10ppm
|
Accuracy |
±5.0% of full scale* |
Response time |
<30 seconds to 90% of step change input |
Output signal |
4 - 20mA 800 Ohms max loop res. at 24VDC |
Environment |
Designed to IP54 |
Temperature range |
-10º to + 45ºC ** |
Humidity range |
15% to 95% RH non-condensing |
Operating pressure range |
90 to 110kPa |
Operating voltage |
9 - 28 VDC |
Operating power |
96mW to 480mW at 24V |
Connections |
2 - wire loop powered |
Weight |
approx 250 grams |
* Across the temperature range 10ºC to 30ºC, atmospheric pressure 1013mbar, 50% RH
** Do not exceed 45ºC
{2jtoolbox_content tabs id:2 title: Sensors}
- Carbon Monoxide
- Oxygen
- Hydrogen Sulphide
- Nitrogen Dioxide
- Nitric Oxide
- Ammonia
- Chlorine
- Ethylene Oxide
- Hydrogen
- Bromine
{2jtoolbox_content tabs id:2 title: Housing Options}
iQguard housing options
{2jtoolbox_content tabs id:2 end}