Models
ADT680: Regular version
ADT680W: Data logging and wireless version
Pressure Type: Gauge
Performance
Accuracy: 0.05%FS, 0.1%FS or 0.25%FS
Update Rate: 10 times/Sec ,3 times /Sec (default),
1 time /Sec ,1 time/15 Seconds
Operating Temperate: 14°F to 122°F (-10°C to 50°C)
Compensated Temperate: 14°F to 122°F (-10°C to 50°C), accuracy Guaranteed
Storage Temperature: -4°F to 158°F (-20°C to 70°C)
Overload Pressure: 1.2X
Power Supply
Battery: 2 x AA alkaline (LR6) batteries
Recommend: Duracell MX1500, EnergizerE91,
Panasonic LR6, Duracell 15AU
Usage Period:
10/Sec:1500Hours; 3/Sec: 3,000Hours;
1/Sec: 6000Hours; 1/15Sec: 12,000Hours
Rated Power: 3.0VDC Imax=30mA Pmax=90mW
Material
Wetted Surface: All wetted surfaces are 316L Stainless Steel with welded design (no O-ring, thread tape, epoxy, or sealant on any part of the sensor assembly)
Case: PC+ABS
Protective Cover: Silicone Rubber (Optional)
Display
LCD Specification: FSTN-LCD,Visual scope 36x61mm; Full 5 digits,15.2mm High; 7 segment analog bar graph scaled from 0~100% of FS
Backlight: White
Wireless Communication (ADT680W only)
Wireless Frequency: 2.4G ISM Bands, 20 meter range
Number of wireless Channels : Chanel 1~15
Software: Wireless network demo software for free
Data Logging (ADT680W only)
Storage Capacity: 140,000 readings(time, pressure, and temperature)
Storage Interval: Adjustable from 1~9999 Sec
Compliances
Certificates:CE RTTE, FCC ID, IC ID
Protection Level: IP67
Vibration: 5g(20~2000Hz)
Shock resistance: 100g/11ms
Others
Dimensions: 100mm x 40mm, total height:157mm
Weight: 500g
Fitting: 1/4NPT, G1/4, M20×1.5, or custom-made
Auto off:
Disabled,15, 30, 45, 60, 90, 120 Minutes optional.
Filtering:
Averaging (3 to 10 samples) or low-pass first-order filter.
Engineering units:
Pa, kPa, MPa, bar, mba, psi, kgf/cm2, mmH2O, mmHg, inH2O, inHg, ozf/in, %, °C, °F. Extend units: inH2O(20°C), inH2O(60°F), mmH2O(20°C), mmH2O(15°C), ftH2O(60°F), ftH2O(4°C)
Backlight Duration:
Not auto off,15,30,45,60 seconds optional.
Max/Min data capture:
Saves Max and Min data during pressure measurement.
Key Lockout:
When the gauge is in auto-storing mode, the front panel buttons will be automatically locked.
Overpressure Alarm:
Display will flash over 120%FS
Battery voltage Indicator:
Displays the battery life remaining. When the battery voltage is too low, the gauge willpower-off automatically.
Overpressure Record:
Gauge will record max pressure data when the gauge is over pressured by 120% of FS.
Leakage test:
In leak test mode, the gauge will record beginning pressure, ending pressure, and show the difference ΔP.
Factory Reset:
Resets all settings back to factory default, except the calibration parameters.
Warranty: 1 year
P/N |
Pressure Range |
Media [2] |
Accuracy (%FS) |
Burst Pressure |
(psi) [1] |
(bar) |
V15 |
-15 |
-1.0 |
G |
0.05(0.1,0.25) |
3x |
GP15 |
15 |
1.0 |
G, L |
0.05(0.1,0.25) |
3x |
GP30 |
30 |
2.0 |
G, L |
0.05(0.1,0.25) |
3x |
GP100 |
100 |
7.0 |
G, L |
0.05(0.1,0.25) |
3x |
GP300 |
300 |
20 |
G, L |
0.05(0.1,0.25) |
3x |
GP500 |
500 |
35 |
G, L |
0.05(0.1,0.25) |
3x |
GP1K |
1,000 |
70 |
G, L |
0.05(0.1,0.25) |
3x |
GP3K |
3,000 |
200 |
G, L |
0.05(0.1,0.25) |
3x |
GP5K |
5,000 |
350 |
G, L |
0.05(0.1,0.25) |
3x |
GP10K |
10,000 |
700 |
G, L |
0.05(0.1,0.25) |
2x |
GP15K |
15,000 |
1,000 |
G, L |
0.05(0.1,0.25) |
2x |
GP25K |
25,000 |
1,600 |
G, L |
0.1(0.25) |
2x |
GP30K |
30,000 |
2,000 |
G, L |
0.1(0.25) |
1.5x |
GP36K |
35,000 |
2,500 |
G, L |
0.1(0.25) |
1.5x |
Note: [1] Sealed gauge pressure for above 1,000psi
[2] G = Gas, L = Liquid Please specify media type when ordering